Fatigue Crack Growth Behavior of Titanium Alloy Ti-6AL-4V and Weldment
Mamdouh M. Salama — Conoco Inc.

Rationalization and Optimization of Underwater Inspection Planning Consistent With API RP2A Section 14
Justin Bucknell — MSL Services Corporation, Anindya Ghosh — MSL Services Corporation

Fatigue and Fracture Consideration in the Reliability Based Inspection Planning for the SIRI Production Jack-Up Platform
Kaisheng Chen — MSL Engineering, Ltd.,Nigel Nichols — MSL Engineering, Ltd., Minaz Lalani — MSL Engineering, Ltd., Morten Baerheim — Statoil, Arild Lundberg — Statoil

Application of Probabilistic Fracture Mechanics Analysis for Reassessment of Fatigue Life of a Floating Production Unit: Philosophy and Target Levels
Ole Tom Vårdal — Aker Offshore Partner ASA, Torgeir Moan — Norwegian University of Science and Technology, Lars Gunnar Bjørheim — Statoil

Application of Probabilistic Fracture Mechanics Analysis for Reassessment of Fatique Life of a Floating Production Unit: Theory and Validation
Johannes M. Johannesen — Aker Offshore Partner ASA, Torgeir Moan — Norwegian University of Science and Technology, Ole Tom Vårdal — Aker Offshore Partner ASA

Influences of HAZ Characteristics on CTOD Toughness Variation in Multi-Pass Welded Cryogenic Steel
Jae-il Jang — Seoul National University, Jang-Bog Ju — Seoul National University, Woo-sik Kim — Korea Gas Corporation, Dongil Kwon — Seoul National University

Hyberbaric GMA Welding to 2,500m Water Depth
I. M. Richardson — Cranfield University, J. H. Nixon — Cranfield University, P. Nosal — Cranfield University, P. Hart — Cranfield University, J. Billingham — Cranfield University

Application of Fracture Mechanics Analysis in the Design of Fixed Offshore Structures
Harry J. Cotton — Pipe Line Integrity International

Effect of Plate Width and Free Edges on the Initiation and Propagation of Fatigue Cracks in Plate-To-Plate Welded T-Joints
C. D. Turner — innovative Steam Technologies, S. B. Lambert — University of Waterloo, D. J. Burns — University of Waterloo

Study on the Composite Bonded Repair for Resisting Fatigue Crack Extension
Chung-Hung Lin — National Cheng Kung University, Hui-Kai Lin — National Cheng Kung University

Environmental Approval Process for the Deployment of Non-Bonded Flexible Pipe on the North Slope of Alaska
Cobie W. Loper — Wellstream Inc., Dan Eck — Arco, John Denis — BP Amoco, Beez Hazen — Northern Engineering and Scientific

Fatigue Analysis of Skewed T-Joint Welded Plates
P. Peleties — University College London, F. P. Brennan — University College London

Hammer Peening: A Practical Way to Extend Fatigue Life
William R. Blackstone — American Bureau of Shipping, Roger I. Basu — American Bureau of Shipping

Experience of GTA- and GMA-Welding of 13% Cr Supermartensitic Steel Pipes With Matching Filler Metals
Herbert Heuser — Böhler Thyssen Schweibtechnik GmbH, Claus Jochum — Böhler Thyssen Schweibtechnik GmbH, Ernst Perteneder — Böhler Thyssen Schweibtechnik GmbH, Josef Tösch — Böhler Thyssen Schweibtechnik GmbH, Per E. Kvaale — Statoil Research Center, Russel Fuchs — Böhler Thyssen Welding

Continuous Composite Lines for Methanol Injection on the Asgard Field: Experiences From Production and Installation
Bjørn Melve — Statoil Research Centre, Thor Meland — Statoil Research Centre, Paal Angell Bergh — Stolt Cornex Seaway A/S, Karl Kløvfjell — Statoil

Standards of Performance of Materials Subjected to Accidental Loads
Sava Medonos — Petrellus Ltd., Sami Awad — Petrellus Ltd.

Selection Criteria for Titanium Use Offshore
James S. Grauman — TIMET-Henderson Technical Lab.

On the Conflict Between the Normal Operating Properties of Exotic Materials and Their Properties When Subjected to Accidental or Hazard Temperature Conditions
Christopher P. Rogers — CREA Consultants Ltd.

Fire Survival Cables for High Temperature Applications
H. Cizmic — HCom Ltd., P. Pourtier — Pourier Pere&Fils

Performance of Materials Used on an Offshore Separator Affected by a Fire
Geir Berge — Petrell a.s., Sava Medonos — Petrellus Ltd.

The Derivation of Buckling Equilibrium Equations of Arbitrarily Loaded Generic Nonprismatic Monoclinic Offshore/Ocean Bar Structures and the Analysis by DQEM Using EDQ
Chang-New Chen — National Cheng Kung University

DQEM for Nonuniform Shear Deformable Axisymmetric Orthotropic Circular Plate Problems in Offshore/Ocean Structures
Chang-New Chen — National Cheng Kung University

Local Variations in Yield Strength: A Means for the Design of More Fracture Resistant Materials
Otmar Kolednik — Austrian Academy of Scienes

Buckling and Post-Buckling Analyses of a Glare Thick Flat Side Panel
Alfonso Apicella — Alenia Finmeccanica, Enrico Armentani — University of Naples, Calogero Calì — University of Salermo, Francesco Caputo, Jr. — University of Naples, Renato Esposito — University of Naples