|
OMAE2007-29050 |
Finite Element Validation Studies of BS7910 FAD Method Applied to
Welded SHS Joints |
Zhengmao Yang |
|
|
|
Seng Tjhen Lie |
|
|
|
Wie Min Gho |
|
OMAE2007-29051 |
TN X SN Fatigue Curves for KS Hook and Chain Using Finite Elements
Modelling and Model Test |
José Carlos Lima de Almeida |
|
|
|
Ronaldo Rosa Rossi |
|
|
|
Ricardo Sobral |
|
OMAE2007-29054 |
Damping Properties of Sandwich Metal-Polymer-Ceramic Coating |
M. V. Kireitseu |
|
|
|
L. Bochkareva |
|
OMAE2007-29060 |
Sour Service Corrosion Fatigue Testing of Flowline Welds |
Fraser McMaster |
|
|
|
David Walters |
|
|
|
Jonathan Bowman |
|
|
|
Hugh Thompson |
|
|
|
Michelle Zhang |
|
OMAE2007-29183 |
Metallurgical Design of Newly Developed Material for Seamless Pipes
of X80-X 100 Grades |
Yuji Arai |
|
|
|
Kunio Kondou |
|
|
|
Hiroyuki Hirata |
|
|
|
Hasahiko Hamada |
|
|
|
Keisuke Hitoshio |
|
|
|
Nobuyuki Hisamune |
|
|
|
Tsuneo Murase |
|
OMAE2007-29185 |
Stress Measurements at Hot Spots Using StressProbe |
I. Lotsberg |
|
|
|
M. M. Salama |
|
|
|
W. D. Dover |
|
|
|
R. R. Karé |
|
|
|
N. Stone |
|
OMAE2007-29194 |
A Cohesive Zone Modeling Approach to Hydrogen Induced Stress
Cracking in 25%Cr Duplex Stainless Steel |
Vigdis Olden |
|
|
|
Christian Thaulow |
|
|
|
Roy Johnsen |
|
|
|
Erling Østby |
|
OMAE2007-29197 |
Effect of Constraint on Fatigue Crack Propagation in T-Plate Welded
Joints |
Xin Wang |
|
|
|
Qing Gao |
|
OMAE2007-29220 |
Controlled Weld Toe Profiles for Fatigue Life Extension in FSO’s and
FPSO’s |
J. Efraín Rodríguez-Sánchez |
|
|
|
Alejandro Rodríguez-Castellanos |
|
|
|
Manuel F. Carbajal-Romero |
|
|
|
Efrén Ayala-Uraga |
|
OMAE2007-29225 |
Development of Ultrasonic Phased Array Probe for SAW Seam Inspection
of UOE Pipe |
Masaki Yamano |
|
|
|
Hiroyuki Okubo |
|
|
|
Takumi Horikiri |
|
|
|
Makoto Nagase |
|
OMAE2007-29282 |
Sheath Materials for Direct Electrical Heating Cable: Long Term
Testing |
Bjørn Melve |
|
OMAE2007-29345 |
Probabilistic Fracture Mechanics Methodology Applied to Pipes
Subjected to Multiple Reeling Cycles |
Hugo A. Ernst |
|
|
|
Richard E. Bravo |
|
|
|
Ricardo Schifini |
|
|
|
Diego N. Passarella |
|
OMAE2007-29351 |
Low Cycle Fatigue of T-Tubular Joints With Out-of-Plane Bending
Loading |
Stig Berge |
|
|
|
Frøydis Boge |
|
|
|
Torgeir K. Helland |
|
OMAE2007-29360 |
Corrosion Fatigue Behaviour of Welded Risers and Pipelines |
D. P. Baxter |
|
|
|
S. J. Maddox |
|
|
|
R. J. Pargeter |
|
OMAE2007-29399 |
Fatigue Testing and Analysis of Full Scale Girth Welded Tubulars |
Stig Wästberg |
|
|
|
Mamdouh M. Salama |
|
OMAE2007-29412 |
Subsea Pipeline Monitoring Using Fibre Optic Strain Sensors |
Damon Roberts |
|
OMAE2007-29414 |
Condition Based Integrity Assessment of Pipelines |
Amrita Kumar |
|
|
|
Robert Hannum |
|
|
|
Shawn J. Beard |
|
|
|
Mamdouh M. Salama |
|
|
|
Will Durnie |
|
OMAE2007-29428 |
Fatigue Characterization of Long Dynamic Risers in Deep Waters |
Mohammad Iranpour |
|
|
|
Farid Taheri |
|
|
|
J. Kim Vandiver |
|
OMAE2007-29485 |
SmartPipe: Self Diagnostic Pipelines and Risers |
Ole Øystein Knudsen |
|
|
|
Erling Østby |
|
|
|
Egil Giertsen |
|
|
|
Knut Grythe |
|
|
|
Per Schjølberg-Henriksen |
|
|
|
Frøydis Oldervoll |
|
OMAE2007-29549 |
Relative Importance of Defects in Girth Welds of Linepipes |
Oddvin Örjasaeter |
|
|
|
Hans Olav Knagenhjelm |
|
|
|
Per J. Haagensen |
|
OMAE2007-29558 |
Case Studies on ECA-Based Flaw Acceptance Criteria for Pipe Girth
Welds Using BS 7910:2005 |
Mohamad J. Cheaitani |
|
OMAE2007-29561 |
Development and Production of Ultra-High Strength Linepipes With
Dual-Phase Microstructure for High Strain Application |
Nobuyuki Ishikawa |
|
|
|
Mitsuru Okatsu |
|
|
|
Shigeru Endo |
|
|
|
Joe Kondo |
|
|
|
Junji Shimamura |
|
|
|
Ryuji Muraoka |
|
|
|
Nobuo Shikanai |
|
OMAE2007-29571 |
Stress Concentrations Factors in Welded Tubular Sections and
Pipelines |
Inge Lotsberg |
|
|
|
Per Arvid Holth |
|
OMAE2007-29578 |
Hatch Seal Design Parameters for Manned Submersibles |
Jerry A. Henkener |
|
|
|
Donald W. Johnson |
|
OMAE2007-29579 |
Material Challenges in Artic Areas |
Agnes Marie Horn |
|
|
|
Per Egil Kvaale |
|
|
|
Mons Hauge |
|
OMAE2007-29581 |
Development and Qualification of Pipeline Welding Procedures for
Strain Based Design |
Agnes Marie Horn |
|
|
|
Martin W. Hukle |
|
|
|
Dan B. Lillig |
|
|
|
Brian D. Newbury |
|
|
|
John Dwyer |
|
OMAE2007-29608 |
Fatigue Design Data Derived Form Full Scale Tests on 6” OD Pipe
Girth Welds |
Per J. Haagensen |
|
|
|
Hans Olav Knagenhjelm |
|
|
|
Oddvin Ørjasaeter |
|
OMAE2007-29612 |
Experiences From Welding and AUT of the 15” Norne Clad Pipeline
Installed With the Reeling Method |
Per Egil Kvaale |
|
|
|
Tore Haabrekke |
|
|
|
Gisle Rørvik |
|
|
|
Guy Bärs |
|
OMAE2007-29614 |
Correlation of Phased Array Inspection and Fatigue Performance of
FSW Joints |
Delphine S. Caravaca |
|
|
|
Colin Bird |
|
|
|
Stephen Maddox |
|
OMAE2007-29696 |
Explaining Porosity Formation in Underwater Wet Welds |
Faustino Pérez-Guerrero |
To
locate a paper by author's name, a word in title, etc., you can use
the 