Ocean, Offshore and Arctic Engineering (OOAE) Division
The American Society of Mechanical Engineers (ASME International)

 

Search the OOAE web

Site Map of OOAE Web

You can also come to these pages from www.omae.org

ISI CURRENT WEB CONTENTS WEB SITE SELECTION CRITERIA

 

OMAE '96, 15th International Conference on
OFFSHORE MECHANICS & ARCTIC ENGINEERING
June 16-20, 1996, Florence, ITALY
DATABASE
To locate a paper by author's name, a word in title, etc., you can use the SEARCH facility to find the web page the paper is listed in.  To find the word you are searching for within a web page, use the Edit -> Find pull-down menu of your browser.

SYMPOSIA:

bulletMaterials
bulletOffshore Technology
bulletPolar & Arctic
bulletPipeline Technology
bulletSafety & Reliability
bulletSubsea Technology

MATERIALS SYMPOSIUM

Grouted Pile to Sleeves Connections: Design Provisions for the New ISO Standard for Offshore Structures Harwood, Robert G.
Billington, Colin J.
Buitrago, Jaime
Sele, Arne B.
Sharp, John V.
The Revised BS PD 6493 Assessment Procedure: Application to Offshore Structures Stacey, A.
Burdekin, F. M.
Maddox, S. J.
Factors Affecting Thermally Simulated HAZ Microstructures Cardinal, N.
Influence of Al, Ti, V and O on Acicular Ferrite Formation in TIG Weld Metal Abson, David J.
Francis-Scrutton, Nia
The Influence of Composition of Heat Affected Zone Toughness of C-Mn Microalloyed Steels Barnes, A. M .
Hart, P. H. M.
Comparison Between Pulsed MIG and Short-Circuit MAG on Economical Aspects for Structural Building Scotti, Amrico
Pereira, Warley A.
Tube Thickness Influence in the Sheet/Tube Joint Deformation Obtained by Electrical Resistance Spot Welding Damasco, Astrid
Duboc do Natal, Yelson
Ferreira, Itamar
Hydrogen Content of Underwater Wet Welds Deposited by Rutile and Oxidizing Electrodes Pope, Alexandre M.
Liu, Stephen
Shielding Conditions of Local Cavity for Underwater Arc Spot Welding Ogawa, Y.
Koga, H.
Design Consideration for Wet Welded Joints Szelogowski, P.
Osthus, V.
Petershagen, H.
Pohl, R.
Lafaye, G.
Amoco Trinidad Selects Wet Welding Repair Option Ibarra, S. J. (Jim)
Reynolds, Thomas J.
Gabriel, Vernon
Haymaker, Gary A.
Wet Underwater Welding Trials With Commercial Manual Metal Arc Electrodes Abson, David J.
Cooper, M. J.
Operational Parameter Fields in Hyperbaric Plasma Keyhole Welding of Mild Steel Line Pipe Hoffmeister, Hans
Huismann, Gerd
Sommer, Uwe
Knagenhjelm, Hans Olav
Arc Voltage Measurements of the Hyperbaric MIG Process Huismann, Gerd
Hoffmeister, Hans
Development of a Nozzle for Underwater Laser Beam Welds Habenicht, Ingo
dos Santos, Jorge F.
Szelagowski, P.
Franz, Thomas
Fatigue Cracking at Anode Support Brackets in an Offshore Jacket Structure Ritchie, D.
van der Stap, A.
Abdullah, Kamaruddin
Effect of Stress and Temperature on Mode of Fracture After Reheat Cracking Ferraresi, Valtair Antonio
da Exalta‹o Trevisan, Roseana
Evaluation of Interface Strength of Plasma Sprayed Coatings by the Local Approach Satoh, Susumu
Tsukamoto, Mitsuo
Minami, Fumiyoshi
Toyoda, Masao
Nickel Alloy Stud Bolts Failure: A Case History Toffolo, G.
Fassina, P.
Marangoni, M.
Msallem, A.
Hydrogen Embrittlement of Cathodically Protected Duplex Stainless Steels in Seawater Containing Sulphides Robinson, M. J.
Kilgallon, P. J.
Newman, M.
Crack Arrestability of Ship Hull Steel Plate in Accidental Conditions: Application of High Arrestability Endowed Ultra Fine-Grain Surface Layer Steel Ishikawa, Tadashi
Hagiwara, Yukito
Oshita, Shigeru
Inoue, Takehiro
Hashimoto, Kunifumi
Kuroiwa, Takashi
Tada, Masuo
Yajima, Hiroshi
Fracture Toughness Requirement for Fracture Performance Evaluation of Welded Joints Based on the Local Approach Minami, Fumiyoshi
Ohata, Mitsuru
Toyoda, Masao
Tanaka, Teruyuki
Arimochi, Kazushige
Glover, Alan G.
North, Tom H.
Probabilistic Fracture Toughness of Welded Joint for Offshore Structures Guoming, Chen
Fayan, Xu
Huacan, Fang
Xiaogang, Yang
Static Strength Assessment of Cracked Tubular Joints Stacey, A.
Sharp, J. V.
Nichols, N. W.
Parameter Study on the Static Strength of Axially Loaded Multiplanar XX-Joints in Rectangular Hollow Sections Yu, Y.
Wardenier, J.
Welding Fabrication Defects in Two Offshore Steel Jacket Structures Thurlbeck, S. D.
Stacey, A.
Sharp, J. V.
Nichols, N. W.
Implications for Platform Re-Assessment Based on In-Service Damage Resulting From Accidental Loadings Sharp, J. V.
Stacey, A.
Frieze, P. A.
Nichols, N. W.
Design of Hybrid Composite Tubulars Ochoa, O. O.
Ross, G. R.
Liggett, G. M.
The Qualification of Advanced Composite Pipe for Use in Fire Water Deluge Systems on Open Type Offshore Oil Platforms Lea, Richard H.
Stubblefield, Michael A.
Pang, Su-Seng
Machining Process and Superficial Hardness of Carbon-Carbon Composites Coppini, Nivaldo L.
Ferreira, Jo‹o R.
Neto, Flam’nio Levy
Freitas, Alexandre C.
Pardini, Luiz C.
Critical Design Aspects of Dynamic Titanium Alloy Risers Baxter, Carl F.
Schutz, Ronald W.
Implications of Changes in the Post-Weld Heat Treatment Requirements on Properties of Steels and Welds for Offshore Structures Pisarski, Henryk G.
Post Weld Heat Treatment of Offshore Structures: A Fabricators Viewpoint Lochhead, James C.
Corrosion Resistance of GTAW and EBW Welded Joints of DIN W. Nr. 1.4462 (UNS S31803): Effect of Post-Weld-Heat-Treatment Brandi, Srgio D.
Padilha, Angelo F.
Wolynec, Stephan
Design Approaches for Avoiding PWHT of North Sea Offshore Platforms Denney, Alan K.
Barraclough, Charles H. T.
The Problems of Weld Metal or Heat Affected Zone Toughness in Offshore Structural Steels Hancock, P.
Spurrier, J.
Chubb, J. P.
A Review of Fatigue Crack Growth Rates for Offshore Steels in Air and Seawater Environments King, R. N.
Stacey, A.
Sharp, J. V.
Evaluation and Calibration of Fatigue Cracking in Tubular Joints Using Improved Crack Growth Laws King, R. N.
Stacey, A.
Sharp, J. V.
Predicting Overload-Affected Fatigue Crack Growth in Steels Skorupa, Malgorzata
Skorupa, Andrzej
Ladecki, Boguslaw
Strain Behavior at Stable Crack Tip and Effect of Strength Mis-Match on Crack Growth Resistance Michiba, Kouji
Hiramatsu, Hideki
Hasegawa, Hisao
Matsumura, Hiroyuki
Toyoda, Masao
The Effect of Over-Matching on Brittle Crack Propagation Behavior in Welded Joints Arimochi, Kazushige
Konda, Noboru
Fracture Behaviour of Surface Cracked Wide Plates of High Strength Steel Containing Overmatched Repair Welds Junghans, Eva
Koak, Mustafa
Schwalbe, Karl-Heinz
Effect of Soft Root Weld Layer on Fracture Toughness of Under-Matched Weld Joints on Q+T Steel Rak, Inoslav
Koak, Mustafa
Gliha, Vladimir
Praunseis, Zdravko
Consequences of Weld Undermatching and Overmatching: Non-Uniform Hydrogen Distribution Wang, W. W.
Liu, S.
Olson, D. L.
Mechanical Properties of Cold-Rolled AISI 304LN Steel at Low Temperatures Ilola, Risto J.
HŠnninen, Hannu E.
HeinŠkari, Matti J.
High Strength Steels Used in Offshore Installations Stacey, A.
Sharp, J. V.
King, R. N.
The Influence of Cracks on the Static Strength of Tubular Joints Stacey, A.
Sharp, J. V.
Nichols, N. W.
Review of the Corrosion Fatigue Performance of Medium to High Strength Structural Steels Healy, J.
Billingham, J.
Stacey, A.
Simpson, R.
Patel, R.
Properties of Submerged Arc Welded TMCP-Steel Weldments Kotamies, Juha M. N.
Brederholm, Anssi T.
HŠnninen, Hannu E.
Internal Ultrasonic Examination of Ring Stiffened Tubular Joints Mudge, Peter J.
Nichols, Nigel W.
Sharp, John V.
Fatigue Behaviour of Internally Ring Stiffened Tubular Joints Slater, Graham
Tubby, Peter J.
An Assessment of the Fatigue and Remaining Static Strength Performance of Ring Stiffened Joints Nichols, N. W.
Slater, G.
Fatigue Performance of Welded Aluminum Deck Structures Haagensen, Per J.
Ranes, Marit
Kluken, Arnt O.
Kvale, Ivar
Proposed Fatigue Provisions in the New ISO Code for Offshore Structures Baerheim, Morten
Stacey, Alexander
Nichols, Nigel
Evaluation of Stress Intensity Factor Solutions for Offshore Tubular Joints Cheaitani, M. J.
Bolt, H. M.
Evaluation of Fracture Data on Cracked Offshore Tubular Joints Using BSI PD 6493:1991 Cheaitani, M. J.
Billington, C. J.
An Experimental Investigation of Fatigue Crack Growth and Shape Development of Coalescing Cracks Bell, Robert
Harrington, David S.
Fatigue Life Evaluation and Full Scale Testing of an Aluminum Bridge Lotsberg, Inge
Karlsen, Agnar
Oma, ke
Seif, Mohammad Saeed
Asada, Hiroshi
Yamashita, Seiya

OFFSHORE TECHNOLOGY SYMPOSIUM

Non-Linear Random Wave Kinematics Models Verified Against Measurements in Steep Waves Stansberg, Carl Trygve
Gudmestad, Ove T.
Non-Gaussian Extreme Waves in the Central North Sea Skourup, Jesper
Hansen, Niels-Erik Ottesen
Andreasen, Kristian Kudsk
Distribution of Sea Wave Heights: Effects of a New Criterion of Defining Discrete Waves Pires-Silva, Ant—nio A.
Medina, Josep R.
Nonlinear Transient Wave Excitation as a New Tool in Model Testing Clauss, GŸnther F.
KŸhnlein, Walter L.
Sea Surface Wind Stress in Stratified Atmospheric Flow Myrhaug, Dag
Slaattelid, Olav H.
Nonlinear Fourier Analysis With CNOIDAL Waves Osborne, A. R.
Parametrics of Submarine Dynamic Stability in the Vertical Plane Papoulias, Fotis A.
Papanikolaou, Stavros
A Theoretical Method for Determining Slam Impact Pressure Distributions on Ship Sections Kaplan, Paul
Cavitation Erosion in Blocked Flow With a Ducted Ice-Class Propeller Doucet, J. Michael
Bose, Neil
Walker, Dan
Jones, Stephen J.
Reliability Based Criteria for Fixed Steel Offshore Platforms Efthymiou, Mike
van de Graaf, Jan Willem
Tromans, Peter S.
Hines, Ian M.
Reliability of a Jacket Structure in a Tropical Cyclone Environment Vanderschuren, Luc
Efthymiou, Mike
Tromans, Peter S.
van de Graaf, Jan Willem
The Probability Distribution of Extreme Wave Load on Space Frame Ocean Structures Tromans, Peter S.
van Dam, Jelle
Hydrodynamic Force Characteristics in the Splash Zone Daliri, Mohammad Reza
Haritos, Nicholas
Extreme Responses of Non-Linear Dynamic Systems Using Constrained Simulations Harland, Lon A.
Vugts, Jan H.
Jonathan, Philip
Taylor, Paul H.
Vortex Induced Vibrations in Wind: Design Criteria Oppen, Arne N.
Kvitrud, Arne
Physical Model Tests and Numerical Simulations of a Pipeline Under Wave Action Marchal, J. L. J.
Rigo, P.
Pirenne, Y.
Wang, H.
Li, Yucheng
Lai, Guozhang
Wang, Ge
Chen, Bin
A Comparison Between Measured and Predicted Hydrodynamic Damping for a Jack-Up Rig Model Laursen, T.
Rohbock, L.
Jensen, J. J.
Baatrup, J.
GrŸndlehner, Gert-Jan
Prediction of Viscous Ship Roll Damping by Unsteady Navier-Stokes Techniques Korpus, Richard A.
Falzarano, Jeffrey M.
Parametric Identification of Coupled Sway and Yaw Motions Haddara, Mahmoud R.
Wang, Yie
Calculations of Current-Induced Forces on Moored Tankers, Using the Theory of Manoeuvring Ships Mirza, Saadat
The Two-Dimensional Differential Quadrature Element Method Frame Model Chen, Chang-New
Stress Concentration Factors for Dented Tubular Members Buitrago, Jaime
Hsu, T. M.
Submarine Pressure Hull Collapse: A Correlation Between Numerical and Experimental Analyses Boote, Dario
Figari, Massimo
Mascia, Donatella
Iaccarino, Raffaele
Wave-Induced Pore Pressure and Effective Stresses in a Porous Seabed With Variable Permeability Jeng, Dong S.
Seymour, Brian R.
Application of Large Eddy Simulation to Flow Past a Circular Cylinder Lu, Xiyun
Dalton, Charles
Zhang, Jianfeng
The Effect of In-Line Spacing of Two Cylinder Groups on the Morison Force Coefficients Smith, Darren J.
Haritos, Nicholas
Oscillating Turbulent Flow With or Without a Current About a Circular Cylinder Sarpkaya, Turgut
de Angelis, Marc
Hanson, Craig
Experimental Verification of Partially Compressible Fluid Flow Model for Breaking Wave Forces on Wall-Type Structures Arunachalam, A. V. M.
A New Non-Slender Ringing Load Approach Verified Against Experiments Krokstad, J¿rgen R.
Stansberg, Carl Trygve
NestegŒrd, Arne
Marthinsen, Tom
A Case Study of Middle Size Floating Airports for Shallower and Deeper Waters Yoshida, Koichiro
Suzuki, Hideyuki
Nishigaki, Makoto
Enomoto, Kazuo
Second-Order Wave Effects on TLP Tendon Tension Responses XŸ, Hongbo
Mercier, Rick S.
One Approach to TLP Preliminary Design Using Optimization Techniques Vasconcellos, Jos M.